Anasayfa » Mağaza » 3D Yazıcı » FDM Yazıcı » Bambu Lab A1 3D Yazıcı
Ürünlere dön
Anycubic Ten Rengi Reçine 1kg Orijinal fiyat: 540,00₺.Şu andaki fiyat: 510,00₺.

Bambu Lab A1 3D Yazıcı

Stoktan Teslim

17.200,00

Sadece 1 adet kaldı

Sadece 1 adet kaldı

5 Şu anda bu ürünü inceliyor.

EFT ile Ödemede % 3 İndirim.

Açıklama

Bambu Lab A1 3D Yazıcı

Bambu Lab A1 3D Yazıcı

  • Full-auto Calibration
  • Active Flow Rate Compensation
  • 1-Clip Quick Swap Nozzle
  • Active Motor Noise Cancelling
  • 256*256*256 mm³ Build Volume

Multi-Color Printing

The all-new AMS lite is elegant and reliable, making multi-color 3D printing accessible to everyone.

Active Flow Rate Compensation

The A1 revolutionizes flow control in 3D printing. It utilizes a high-resolution, high-frequency eddy current sensor to measure the pressure in the nozzle. Our algorithm actively compensates the flow rate according to the readings to extrude with accuracy.

Full Auto Calibration

The A1 handles various calibrations all by itself. It meticulously calibrates the Z-offset, bed-level, vibration resonance and nozzle pressure for EVERY print job, automatically.

Quick Swap Nozzle

All-new quick swap hotend design, the hotend pops in and out with just 1-Clip.

Active Motor Noise Cancelling

The A1 can calibrate parameters to match tiny individual differences between each drive motor. This compensates for the unwanted harshness of motor noise.

Bed Slinger, with CoreXY Speed And Quality

Full-metal rails, rigid frame, nozzle pressure sensor, accelerometers, powerful MCU, and above all, an advanced motion control system that utilizes these features to print a 14-minute benchy with quality and following all the speed benchy rules straight out of the box without using specialized filaments.

Sync with Bambu Studio and Bambu Handy

Remote control and monitor your printer on Bambu Studio or Bambu Handy. Through the built-in camera, you can also record timelapse videos.

A1 Tech Specs

ItemA1 Specification
BodyBuild Volume(W*D*H)256*256*256 mm³
ToolheadHot EndAll-Metal
NozzleStainless Steel
Max Hot End Temperature300 °C
Nozzle Diameter0.4 mm (Included)
0.2 mm, 0.6 mm, 0.8 mm
HeatbedBuild PlateBambu Textured PEI Plate (Included)
Bambu High Temperature Plate (Smooth PEI)
Bambu Cool Plate
Max Build Plate Temperature100°C
SpeedMax Speed of Tool Head500mm/s
Max Acceleration of Tool Head10m/s²
Supported FilamentPLA, PETG, TPU, PVAIdeal
ABS, ASA, PC, PA, PET,
Carbon/Glass Fiber Reinforced Polymer
Not Recommended
SensorsChamber Monitoring CameraLow Frame Rate Camera (Up to 1080P)
Timelapse Supported
Filament Run Out SensorYes
Filament OdometryYes
Power Loss RecoverYes
Filament Tangle SensorYes
Physical DimensionsA1 : 385*410*430 mm³ , Package size : 552*532*320 mm³ , Net weight 8.3 kg , Gross weight 11.7 kg
A1 Combo : Package size 546*536*420 mm³ , Gross weight (AMS lite included) 14.3 kg

What’s in the box

 

Bambu Lab A1

Spool Holder

Purge Wiper

Build Plate

PTFE Tube*1

Bambu Filament Samples (Random Color)

Stainless Steel Nozzle(pre-installed)

Accessory Box

Müşteri Yorumları

Değerlendirmeler

There are no reviews yet

Sadece bu ürünü satın almış olan müşteriler yorum yapabilir.