Name: Bambu Lab A1 Combo 3D Yazıcı
Brand: Bambu Lab
SKU: Bambu Lab A1 Combo 3D Yazıcı
Availability: OutOfStock

Bambu Lab A1 Combo 3D Yazıcı

Multi-Color Printing
Full-auto Calibration
Active Flow Rate Compensation
1-Clip Quick Swap Nozzle
Active Motor Noise Cancelling
256*256*256 mm³ Build Volume

Multi-Color Printing

The all-new AMS lite is elegant and reliable, making multi-color 3D printing accessible to everyone.

Active Flow Rate Compensation

The A1 revolutionizes flow control in 3D printing. It utilizes a high-resolution, high-frequency eddy current sensor to measure the pressure in the nozzle. Our algorithm actively compensates the flow rate according to the readings to extrude with accuracy.

Full Auto Calibration

The A1 handles various calibrations all by itself. It meticulously calibrates the Z-offset, bed-level, vibration resonance and nozzle pressure for EVERY print job, automatically.

Quick Swap Nozzle

All-new quick swap hotend design, the hotend pops in and out with just 1-Clip.

Active Motor Noise Cancelling

The A1 can calibrate parameters to match tiny individual differences between each drive motor. This compensates for the unwanted harshness of motor noise.

Bed Slinger, with CoreXY Speed And Quality

Full-metal rails, rigid frame, nozzle pressure sensor, accelerometers, powerful MCU, and above all, an advanced motion control system that utilizes these features to print a 14-minute benchy with quality and following all the speed benchy rules straight out of the box without using specialized filaments.

Sync with Bambu Studio and Bambu Handy

Remote control and monitor your printer on Bambu Studio or Bambu Handy. Through the built-in camera, you can also record timelapse videos.

A1 Tech Specs

Item		A1 Specification
Body	Build Volume(WDH)	256256256 mm³
Toolhead	Hot End	All-Metal
	Nozzle	Stainless Steel
	Max Hot End Temperature	300 °C
	Nozzle Diameter	0.4 mm (Included) 0.2 mm, 0.6 mm, 0.8 mm
Heatbed	Build Plate	Bambu Textured PEI Plate (Included) Bambu High Temperature Plate (Smooth PEI) Bambu Cool Plate
Heatbed	Max Build Plate Temperature	100°C
Speed	Max Speed of Tool Head	500mm/s
Speed	Max Acceleration of Tool Head	10m/s²
Supported Filament	PLA, PETG, TPU, PVA	Ideal
Supported Filament	ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced Polymer	Not Recommended
Sensors	Chamber Monitoring Camera	Low Frame Rate Camera (Up to 1080P) Timelapse Supported
	Filament Run Out Sensor	Yes
	Filament Odometry	Yes
	Power Loss Recover	Yes
	Filament Tangle Sensor	Yes
Physical Dimensions	A1 : 385410430 mm³ , Package size : 552532320 mm³ , Net weight 8.3 kg , Gross weight 11.7 kg A1 Combo : Package size 546536420 mm³ , Gross weight (AMS lite included) 14.3 kg